Motor Assembly Parts

2NM Through 50NM Parts :

                                                                           12mm Weld Assembly r1

 

Drive Spindle Weld Assembly (Part number varies according to size)

 

20mm Brass Liner (Part # 601200XX – (XX varies according to length))

 

12mm Idler (Part # 601239XX – (XX varies according to length))

 

20mm Liner Nut (Part # 10011900)

 

 

20mm Stainless Steel Washer (Part # 10024300)

 

20mm Rubber Washer (Part # 10020600) – replace this part if water leakage is noticed around brass liners.

 

Gasket Adapter Plates – (Part # 60119600 (stainless steel, powder- coated black) and Part # 60267900 (rubber)) –  replace rubber part if water leakage is noticed around brass liners.

 

8mm Spindle Nut (Part # 10013900)

 

8mm Spindle Nut Cap (Part # 10060300)

 

12mm Spindle Circlip (Part # 10041900)

 

12mm O Ring (Part # 10061300) – replace this part if water leakage is noticed through the inside of  brass liners. Typically replace shim washers, wavey washer and circlips at the same time.

 

12mm Shim Washer (Part # 10025500)

 

12mm Wavy Washer (Part # 10026300)

 

20mm Weather Cap (Part # 60034600)

 

 

 

 

Linkage Assembly for 50Nm 24 volt motor assembly, using “dog bone” double ended rod end bearing (Part # 50Nm24VDBA)

 

 

 

 

Linkage Assembly for 50Nm 24 volt motor assembly, using “tie bar” single ended rod end bearings (Part # 50Nm24VTBA)

1DRIVKIT

 

 

 

 

 

 

 

 

Assembly kit for repairing water leakage in drive assembly (Part # 1DRIVKIT)

1IDLKIT

 

 

 

 

 

 

 

 

Assembly kit for repairing water leakage in idler assembly (Part # 1IDLKIT)

 

70NM Through 110NM Parts :

 

16mm Weld Assembly r1

 

 

 

Drive Spindle Weld Assembly (Part number varies according to size)

 

26mm Brass Liner (Part # 68002XX – (XX varies according to length))

 

16mm Idler (Part # 680008XX – (XX varies according to length))

 

26mm Liner Nut (Part # 10015300)

 

26mm Stainless Steel Washer (Part # 10026100)

 

26mm Rubber Washer (Part # 10029100) – replace this part if water leakage is noticed around brass liners.

 

10mm Spindle Nut (Part # 10018000)

 

10mm Spindle Nut Cap (Part # 10063500)

 

16mm Spindle Circlip (Part # 10043000)

 

16mm O Ring (Part # 10060600) – replace this part if water leakage is noticed through the inside of  brass liners. Typically replace shim washers, wavey washer and circlips at the same time.

 

16mm Shim Washer (Part # 10027700)

 

16mm Wavy Washer (Part # 10027000)

 

26mm Weather Cap (Part # 60054600)

 

 

General Assembly Reference Pictures:

 

Idler Assembly Parts, (from left to right) : circlip, shim washers (2 normally), idler spindle, brass liner, o ring, shim washers (2 normally) circlip

 

Drive Assembly Parts, (from left to right) : drive weld assembly, wavy washer,  brass liner, o ring, shim washers (2 normally), circlip